Struggling with your chainsaw? The Husqvarna 135 Mark II is a reliable tool, but like any machine, it can run into issues over time.
From starting problems to chain tension troubles, understanding these common Husqvarna 135 Mark II problems and their fixes can save you time and money.
Let’s dive into the most frequent issues and how to solve them easily!
Husqvarna 135 Mark II Problems (Short Overview)
The Husqvarna 135 Mark II can face common issues like difficulty starting, oil leakage, or problems with the chain tension.
These problems often arise from clogged air filters, worn-out parts, or improper maintenance.
But don’t worry most of these can be fixed quickly with a little troubleshooting and care!
Read 9 Problems With Fixes In Easy Ways…
1. Difficult Starting
The Husqvarna 135 Mark II chainsaw can sometimes have starting issues, which can be frustrating for users.
Causes
- Dirty or clogged air filter
- Old or bad fuel in the tank
- Incorrect carburetor settings
Fixes
- Clean or replace the air filter regularly
- Use fresh, high-quality fuel mixed as per the manufacturer’s guidelines
- Adjust the carburetor with the help of a user manual or professional assistance
2. Oil Leakage
Oil leakage is a common issue with the Husqvarna 135 Mark II that can cause frustration during use.
Cause:
The most common reasons for oil leakage include a damaged oil seal, loose connections, or cracks in the oil tank.
Over time, wear and tear can compromise the components, leading to leaks.
Fixes:
Check the oil seals and replace them if needed. Tighten any loose connections and inspect the oil tank for cracks.
If there’s damage, swap out the faulty parts with new ones to restore proper functioning. Regular maintenance can also help prevent future leaks!
3. Chain Slipping
Chain slipping is a common problem with the Husqvarna 135 Mark II that can disrupt performance and safety.
Causes of Chain Slipping
- Loose chain tension
- Worn-out guide bar or chain
- Incorrect installation of the chain
Fixes for Chain Slipping
- Adjust the chain tension as per the user manual
- Replace the guide bar or chain if it shows signs of wear
- Ensure the chain is installed correctly before operation
Read Also:
Husqvarna 455 rancher problems
4. Power Loss
If your Husqvarna 135 Mark II is losing power, it can make cutting tasks frustrating and inefficient.
Causes
Power loss may be caused by a clogged air filter, dirty spark plug, old fuel, or a blocked fuel line.
These can restrict the engine’s efficiency, leading to reduced performance.
Fixes
To restore power, clean or replace the air filter, inspect and change the spark plug if needed, and ensure you’re using fresh fuel.
Additionally, check the fuel line for any blockages and clear them. Regular maintenance can help prevent power issues and keep your chainsaw running smoothly.
5. Overheating Engine
One common issue with the Husqvarna 135 Mark II is engine overheating, which can impact its performance and lifespan.
Causes of Overheating
- Clogged air filters prevent proper airflow.
- Dirty cooling fins trapping heat.
- Using the chainsaw without proper maintenance.
Fixes for Overheating
- Regularly clean or replace the air filter.
- Clear the cooling fins to ensure proper ventilation.
- Avoid overworking the chainsaw, and let it cool down between uses.
6. Vibration Issues
The Husqvarna 135 Mark II is a reliable chainsaw, but some users have reported vibration problems during use.
Excessive vibration can make the tool uncomfortable to handle and may even affect performance over time.
Causes of Vibration
Vibration issues are often caused by loose or worn-out parts, such as the chain, guide bar, or engine mounts. Poor maintenance or improper chain tension can also contribute to the problem.
Fixes for Vibration
To fix this, regularly inspect and tighten parts, ensure the chain is properly tensioned, and replace any worn components.
Using anti-vibration gloves can also improve comfort while operating the chainsaw.
Proper maintenance is key to reducing vibration and extending the life of your Husqvarna 135 Mark II.
7. Weak Chain Brake
The Husqvarna 135 Mark II is a reliable chainsaw, but users sometimes face issues with a weak chain brake.
This can make the chainsaw less safe to use, especially during heavy-duty tasks.
A faulty chain brake reduces the saw’s ability to stop the chain quickly, increasing the risk of accidents.
Causes
- Dirt or debris blocking the chain brake mechanism.
- Worn-out or damaged brake components.
- Lack of regular maintenance.
Fixes
- Clean the chain brake mechanism thoroughly to remove dirt and debris.
- Inspect and replace worn or damaged parts, like the brake band or springs.
- Perform regular maintenance to ensure the chain brake stays in good working condition.
8. Clogged Air Filter
A clogged air filter is a common issue with the Husqvarna 135 Mark II that can affect its performance.
When the air filter gets blocked, the chainsaw struggles to get proper airflow, leading to reduced power and efficiency.
Cause
The main cause of a clogged air filter is exposure to sawdust and debris while cutting wood.
Over time, these particles accumulate and restrict airflow to the engine.
Fix
To fix this, remove the air filter and clean it thoroughly with warm soapy water or compressed air.
If the filter is damaged or worn out, replace it with a new one. Regular cleaning and maintenance can prevent this problem and keep your chainsaw running smoothly.
9. Fuel Line Blockages
One common issue with the Husqvarna 135 Mark II is fuel line blockages, which can prevent the chainsaw from starting or running smoothly.
Causes of Fuel Line Blockages
- Dirt or sawdust entering the fuel line
- Build-up from stale or low-quality fuel
Fixes for Fuel Line Blockages
- Inspect the fuel line and clean it using compressed air or a soft brush
- Replace the fuel line if it’s damaged or too clogged
- Always use fresh, high-quality fuel
FAQs
Is Husqvarna 135 a good saw?
Yes, the Husqvarna 135 Mark II is a reliable and efficient chainsaw, particularly suited for light to medium-duty tasks like tree pruning or small-scale wood cutting.
What is the chain size for the Husqvarna 135 Mark II?
The Husqvarna 135 Mark II typically uses a 16-inch guide bar with a 3/8-inch chain pitch and 1.3mm gauge.
How do I replace the chain on a Husqvarna 135 Mark II?
To replace the chain, loosen the bar nuts, remove the clutch cover, replace the old chain with a new one on the guide bar, and reattach the cover while ensuring proper tension.
[…] 9 Common Husqvarna 135 Mark II Problems (With Fixes) […]